Electrical Engineer CV Example & Writing Guide

An electrical engineer CV should make your voltage level, systems and standards obvious at a glance. Employers want to know whether you have worked on LV or HV, on design or on site, and what you delivered — loads, panels, substations, savings and safe shutdowns.

Below you will find a complete electrical engineer CV example, three professional summaries, ready-made bullet points and the skills employers search for. You can open the example in our free CV maker and replace the details with your own.

Electrical Engineer CV example

What employers look for in an electrical engineer CV

• Voltage level and systems: LV, MV or HV; distribution, substations, motors, automation or solar.
• Design or site: Whether you calculate and draw, or install, test and maintain.
• Authority approvals: DEWA, Kahramaa, SEC or local utility inspections and registrations.
• Software and standards: AutoCAD, ETAP, DIALux, PLC platforms, IEC or NEC.

Electrical Engineer CV summary examples

Your summary is the first thing a recruiter reads. Keep it to two to four sentences: who you are, your strongest result and what you offer. Adapt one of these:

Experienced: Electrical engineer with 8 years of experience in LV/MV power distribution, maintenance and commissioning for industrial plants and commercial buildings in Qatar and Pakistan. Commissioned 11 kV substations and loads up to 6 MVA, and cut energy costs by 14% with a power factor correction project. PEC and UPDA registered.

Another strong example: Electrical site engineer with 4 years of experience on residential tower and villa projects. Supervise cable pulling, panel installation, testing and commissioning with teams of 25 electricians, and have passed all authority inspections at the first attempt on 4 projects.

Entry level or fresher: BSc Electrical Engineering graduate with a 10-week internship at a power distribution company and a final-year project on a 5 kW solar hybrid system. Trained in AutoCAD Electrical, ETAP and PLC programming, and ready to start as a trainee engineer.

More ideas: 15 CV summary examples for different jobs and levels.

Bullet points for an electrical engineer CV

Strong bullet points start with an action verb and include a number. Use these as a starting point and change the figures to your own:

• Supervise installation, testing and commissioning of LV and 11 kV systems for commercial projects up to 6 MVA.
• Commissioned 4 substations and 60+ distribution panels, passing every Kahramaa inspection at the first attempt.
• Lead a team of 25 electricians and technicians with zero electrical incidents in 5 years.
• Reduced cable wastage by 12% by checking schedules and routes before procurement.
• Maintained motors up to 500 kW, transformers, switchgear and PLC-controlled lines in a 24/7 plant.
• Cut energy costs by 14% with a power factor correction and load balancing project.
• Reduced motor failures by 40% through a thermal imaging and insulation testing programme.
• Prepared load schedules, single-line diagrams and cable sizing calculations for 3 building projects.
• Carried out insulation resistance, earth and relay tests and prepared test reports for handover.
• Installed a 250 kW rooftop solar system, saving the client about 30% on daytime electricity.
• Planned and executed 6 plant shutdowns for transformer and switchgear maintenance without overrun.

Skills for an electrical engineer CV

Pick the 8–15 skills that match the job advert and that you can prove at interview:

• LV & MV Power Distribution
• Testing & Commissioning
• Substations (11 kV)
• Switchgear & Transformers
• Motors & Drives (VFD)
• PLC & SCADA
• Load Calculation
• Cable Sizing
• AutoCAD Electrical
• ETAP
• Preventive Maintenance
• Electrical Safety (LOTO)
• IEC Standards

See 100+ skills for a CV for more hard and soft skills by job.

How to write an electrical engineer CV: 4 tips

State ratings

kV, kW, MVA and amps make your experience concrete. “Commissioned 4 × 11 kV substations” is instantly understood.

Separate design from site work

If you have done both, give each its own bullet points so the reader can find what they need.

List registrations for the country

PEC in Pakistan, UPDA in Qatar, Saudi Council of Engineers or DEWA approvals can be a hiring requirement.

Put safety on the page

Lock-out/tag-out, permits to work and incident-free years matter in every electrical job.

Job titles this CV example works for

The same structure works for related roles, including: Electrical Site Engineer, Electrical Design Engineer, Power Engineer, Electrical Maintenance Engineer, Instrumentation Engineer, Electronics Engineer, Automation Engineer, PLC Engineer, Electrical Supervisor. Change the headline, summary and keywords to match the exact title in the job advert.

Make your electrical engineer CV in minutes

Click Edit this CV example to open it in Free CV Maker. Replace the details with your own, watch your CV score rise as you type, then download a clean, ATS-friendly PDF or an editable Word file — free, with no sign-up. Already have a CV? Run it through the free ATS CV checker, and add a matching letter with the cover letter maker.